You can cotnrol these by turning them on and off via the ACP. Use the following steps to enable and disable the different tab permissions for your phpBB forum site. You can select entries you wish to delete by selecting the Mark column and select the Delete Marked button.
Alternatively, you can delete all of them by selecting the Delete all button at the bottom of the screen. Below is an example of the moderator log. As with the Admin log, you can choose to delete all log entries at once with the Delete All button or select entries by selecting the Mark column and click on Delete Marked. The third log in the list is the User activity log.
Also important, is that all shown folders are available and have the correct permissions. Please see the description of each section to find out whether they are optional or required for phpBB to run. If everything is in order, you can continue the installation with Start Install. You now have to decide which database to use. See the Requirements section for information on which databases are supported. If you do not know your database settings, please contact your host and ask for them.
You will not be able to continue without them. You need:. Note: if you are installing using SQLite, you should enter the full path to your database file in the DSN field and leave the username and password fields blank.
For security reasons, you should make sure that the database file is not stored in a location accessible from the web. You don't need to change the Prefix for tables in database setting, unless you plan on using multipe phpBB installations on one database. In this case, you can use a different prefix for each installation to make it work.
After you entered your details, you can continue with the Proceed to next step button. Now phpBB will check whether the data you entered will lead to a successful database connection and whether tables with the same prefix already exist.
A Could not connect to the database error means that you didn't enter the database data correctly and it is not possible for phpBB to connect. Make sure that everything you entered is in order and try again. Again, if you are unsure about your database settings, please contact your host. If you installed another version of phpBB before on the same database with the same prefix, phpBB will inform you and you just need to enter a different database prefix.
Now you have to create your administration user. All fields on this page are required. You can also set the default language of your forum on this page. In a vanilla phpBB installation, we only include British English.
You can download further languages from www. In this step, phpBB will try to write the configuration file automatically. The forum needs the configuration file in order to operate. It contains all the database settings, so without it, phpBB will not be able to access the database.
Usually, writing the configuration file automatically works fine. If the file permissions are not set correctly, this process can fail. In this case, you need to upload the file manually. Please read the instructions carefully. After you have uploaded the file, use Done to get to the last step. If Done returns you to the same page as before, and does not return a success message, you did not upload the file correctly. The Advanced settings allow you to set additional parameters of the board configuration.
They are optional and you can always change them later. So, even if you are not sure what these settings mean, you can still proceed to the final step and finish the installation.
If the installation was successful, you can now use the Login button to visit the Administration Control Panel. Congratulations, you have installed phpBB successfully. But there is still work ahead! If you are unable to get phpBB installed even after reading this guide, please look at the support section of the installer's introduction page to find out where you can ask for further assistance.
At this point if you are converting from phpBB 2. If not, you should remove the install directory from your server as you will only be able to access the Administration Control Panel whilst it is present. If you are currently using a stable release of phpBB, updating to this version is straightforward. You would have downloaded one of four packages and your choice determines what you need to do. Note : Before updating, we heavily recommend you do a full backup of your database and existing phpBB files!
If you are unsure how to achieve this please ask your hosting provider for advice. Please make sure you update your phpBB source files too, even if you just run the database updater.
If you have shell access to your server, you may wish to update via the command line interface. Updating using the full package is the recommended update method for boards without modifications to core phpBB files.
First, you should make a copy of your existing config. You can leave alternative styles in place too. If the logo image is not a.
SVG, it will, of course, require a name with the correct extension. You need to find yourself a logo to be uploaded which you are allowed to use or else create your own. Viewed k times. For example, I have this php code that does the login function.
Could anyone be kind enough to guide and teach me how I should do my codes? Improve this question. Trenton McKinney Add a comment. Active Oldest Votes. Improve this answer. Lawrence Cherone Lawrence Cherone I tried to put my system on a linux based computer and now there's a problem with the log file regarding permissions.
How can I fix it? Definitely wouldn't store plain-text passwords, period, including log files. Available since PHP 5. Read more here : php. Especially log files. There are plenty of applications that ask for a password to be stored in a plaintext config file, that's a pretty well accepted norm.
0コメント