Sea Dog Boat Bilge Water Alarm Panel The Bilge Water Alarm panel provides an audible and visual means of warning that water level in your bilge is beyond your bilge pump float switch level Propane is increasingly becoming more and Attwood Water-Resistant Turbo In-Line Bilge Blower The first vane axial-flow fan bilge blowers designed using aerospace technology to maximize performance.
No other bilge blowers in the industry The remote sensor Oops, something went wrong. Please try again. Component Board Assemblies. Refer to the pictures on page 5. The display board will then show this temperature.
The only difference is there is double. Each side can be operated independently. Thermocouple Probe 2. Circuit Board 3. Circuit Board Coil 4. Coil Relay 5. Contactor Coil 6. Contactor 7. Heater Plugs 8. Heat Relay 9. If you are ashore, evacuate the boat.
Do not return until the area is ventilated and the detector has. Proceed with caution and locate and repair the cause of the leak. Seek a. Do not start or use the boat until all the necessary repairs are made.
Check the engine s temperature. Get as far away from the boat as possible. Put on your life jackets. Check the bilge pump water outlet to determine that the pump is running. If it is not running,. Open the hatch or compartment and try to determine the cause of the water leak. If more water. Other gases detected but not listed; Alcohol, Acetone, Hydrogen and most other flammable gases. If proven to have been defective in original materials or workmanship and. Replacement is your exclusive remedy under this limited warranty or any other warranty including any implied warranty of merchantability.
Any and all implied warranties or merchantability or fitness for a particular purpose shall be limited to the. Some states do not allow the limitation or. This warranty gives you specific rights, and you may also have other rights, which may vary, from state to state.
NOTE- There are no user serviceable parts inside the case.
0コメント