We will keep the details of your purchase on file to help you refer to this information in the event of an insurance claim such as loss or theft. Two external units can be controlled by this unit. More advanced tuner operation is explained starting on this page.
AF should be off for normal tuning operation refer to page Switch the display to find out the frequency. Rotate it to increase or decrease the volume.
The newly set volume is stored in memory and recalled for subsequent traffic announcements. More advanced CD operation is explained starting on this page. Track number indicator Shows the track currently playing. Also, if the remaining number of tracks after searching every 10 tracks is less than 10, pressing and holding 4 recalls the first track of the disc.
Track number indicator Shows the track file currently playing. Each of the functions has a two-step adjustment. The COMP function balances the output of louder and softer sounds at higher volumes.
Introduction of advanced multi-CD player operation Function display Shows the function status. RPT indicator Shows when repeat range is selected to current track. Please conform to product regulations such as safety and radiation regulations , and maintain a safe servicing environment by. Use genuine parts. Be sure to use important parts for safety. When you solder while repairing, please be sure that there are no cold solder and other debris.
Soldering should be finished with the proper quantity. Refer to the example. Please be sure that all screws are fastened, and that there are no loose screws. Please be sure that all connectors are inserted, and that there are no imperfect insertion. Please replace the wiring and cables to the original state after repairs. In addition, be sure that there are no pinched wires, etc. Please check that neither solder debris nor screws remain inside the product. Damaged power cords may lead to fire accidents, so please be sure that there are no damages.
If you find a damaged power cord, please exchange it with a suitable one. When spark traces or similar marks are found on the power supply plug, please check the connection and advise on secure. Please exchange the power cord if necessary. When you perform repairs, please pay attention to static electricity, furniture, household articles, etc. Please pay attention to your surroundings and repair safely. To keep the original performance of the products, optimum adjustments and confirmation of characteristics within specification.
For parts that require cleaning, such as optical pickups, tape deck heads, lenses and mirrors used in projection monitors, proper. Please exchange the power cord if necessary. When you perform repairs, please pay attention to static electricity, furniture, household articles, etc. Please pay attention to your surroundings and repair safely. Adjustments To keep the original performance of the products, optimum adjustments and confirmation of characteristics within specification.
Cleaning For parts that require cleaning, such as optical pickups, tape deck heads, lenses and mirrors used in projection monitors, proper cleaning should be performed to restore their performances. Lubricants, Glues, and Replacement parts Use grease and adhesives that are equal to the specified substance.
Make sure the proper amount is applied. Shipping mode and Shipping screws To protect products from damages or failures during transit, the shipping mode should be set or the shipping screws should be installed before shipment. Please be sure to follow this method especially if it is specified in this manual. This service manual should be used together with the following manual s :. CD Mech. Description, Disassembly.
This service manual is intended for qualified service technicians; it is not meant for the casual do-it-yourselfer. Qualified technicians have the necessary test equipment and tools, and have been trained to properly and safely repair. If you are not qualified to perform the repair of this product properly and safely, you should not risk trying to do so.
This product contains lead in solder and certain electrical parts contain chemicals which are known to the state of. California to cause cancer, birth defects or other reproductive harm. You should conform to the regulations governing. Before disassembling the unit, be sure to turn off.
0コメント